Categories
Temperature Data Logger

4 Reason Not to Put Temperature Data Loggers in Fridge

Clients who have started looking for where to buy temperature data logger in order to monitor their freezers along with refrigerators often ask, “do there is a temperature data logger that you can put in your refrigerator? ” Based on the past experience with some customers who’ve tried this approach, we recommend that you do not keep the temperature data logger inside the refrigerator! This sounds easy, but it’s certainly easier than knowing the right way to place a probe from the fridge. However, there are four logic behind why you don’t want to put the temperature data logger from the refrigerator.

gsp-6-temperature-data-logger

Reducing Mark
If the “wireless temperature data logger” is used with WiFi, bluetooth or other styles of wireless data, the metal casing on the refrigerator significantly reduces that “wireless” signal. It’s like trying to use your phone with an elevator. Sometimes them works, sometimes it does not. If the fridge has a glass door, a signal could possibly be received. But if cabinets and doors are made of metal, they rely on signals to reduce small gaps around the door seals. Typically, this ends up with a significant reduction throughout signal strength, which ends up in very limited or intermittent operations.

Reducing Battery Volume
Another important reason is that the low temperature in the refrigerator can greatly lessen the battery capacity. As a rule of thumb, the style of lithium battery most very popular in temperature data loggers is Fifty percent cooler at 0°F. On low temperature, the internal resistance in the battery increases and the particular output voltage decreases. In other words, this can lead for you to frequent battery changes. Some customers develop popular “USB Logger” range, which complains of only a month of battery life. These loggers are surprising for the reason that typically run for half a dozen to nine months on a couple batteries. It was later discovered which the recorder had been placed directly within a refrigerator operating at 0°F.

Slowing Display
If the device provides an LCD and must read data or alarm information in the display, it can possibly be difficult at low temps. The standard LCDS used in most low-cost temperature data loggers are intended to run at temperatures as long as 32 degrees Fahrenheit. If the temperature drops, the present responds very slowly, so the data to the screen may no longer have the ability to be updated. Usually, the monitor is not permanently damaged. It successful during preheating, but the LCD may malfunction with low temperatures.

Condensation Harm
After all, there is a risk that this temperature data logger are going to be damaged by internal condensation when it’s removed from the fridge. At some point, the device is usually pulled right out the refrigerator to download the actual stored data. On comfortable days, leaving the cold data recorder around the table is like making a glass of ice water for the table. If the dew point is beyond the temperature of the recorder being subtracted from the refrigerator, condensation happens. Everyone knows that normal water and electronics don’t selection well! We received several maintenance equipment which showed apparent signs of internal moisture damage on account of condensation. Even if the first bug can be permanent, there is usually your potential problem, and it’s commended to do so.

I realize it is. 4 reasons fat loss put your temperature data logger inside fridge. This may could be seen as a task, but in the long run, it’s a good idea to run the temperature data logger outdoors the refrigerator and work the probe inside. The easiest and most common method could be to pass the probe line with the door seal. Protection with small aluminum foil tape (for AIR CONDITIONING applications) prevents door don.

Leave a Reply

Your email address will not be published. Required fields are marked *